The new series of G100CE presses is certified by TUV Italiae in compliance with the provisions of the Machinery Directive (98/37 / EC) and national implementing provisions:
UNI EN (292-1.292-2), UNI EN 349, UNI EN 418, UNI EN 692, UNI EN 954, UNI EN 1037, UNI EN
Technical data press G100CE
| Absorbed power | 4Kw |
|---|---|
| Maximum force | 100kN |
| Supply | 400V |
| Frequency | 50 Hz. |
| Variable stroke mm | 20,25,30,35,40 40,50,60,70,80 |
| Strokes per minute (default) | 200/140/93 |
| Variable minute strokes (optional) | inverter 84/220 |
| Adjustment of bat | 40mm |
| Flat-mace distance | 280mm |
| Cavity depth | 180/220mm |
| Passage between the shoulders | 250/300mm |
| Flat dimension | 320×480/400x550mm |
| Flat dimension | 39mm |
| Hole on the table | a richiesta |
| Club surface | 100x120mm |
| Club hole | a richiesta |
| Weight (standard presses) * | 340kg |
| Height* | 1250 mm |
| Width* | 500 mm |
| Length* | 660 mm |
| Noise level 71.25dB (A). measured at 0.5 meters distance from itself and at 1.6 meters above the ground |
|
* Excluding any base.
Documentazione
It is possible to download the use and maintenance manual in PDF format..
Case history: troubleshooting
In this section, We take part in our successes by telling you how we have analyzed in a more specific way the characteristics of some projects, finding new technological solutions to improve products and production processes and trying to make it clear what is good or not good of that determined project.
Case history: bearing assembly