Manual presses with toggle-head
The large basic plan of rectified and screwed steel ensures greater versatility and flexibility in the equipment phase.
On request the press can be equipped with additional plates in the case of interchangeable masks.
The height of the head can be regulated through a screw with a knob and containing the allen key for faster positioning.
Moreover, only for the PGMR 300, the support feet are screwed, with the possibility of three different positions. This allows the structure to be positioned on the work table in order to have the little tongue completely free, in this way the lower part of the machine is accessible too.
Technical data Adjustable toggle presses PGMR
|PGMR 100||PGMR 300|
|Working stroke mm||40||40|
|Swan neck mm||100||300|
|Table size mm||130 x 150||150 x 200|
|T-slot din650 mm||10||10|
|Shank mm||10H7 x 25||10H7 x 25|
|Spindele ø mm||25-32||25-32|
|Overall dimension mm||270×150||150×530|
Standard accessories PGMR
Thanks to a lever inserted in a “thousandlines”, the operator can choose the most suitable position of work. Furthermore, all the moving parts work on sintered bushings that can be easily replaced because they can be found on the market.
For higher forces the lever plus lever handle are supplied in one piece without multiposition possibilities.
They are equipped with hole reduction blocks for smaller diameter matrices, furthermore the support feet are screwed, with the possibility of three different positions. This allows the structure to be positioned on the bench so as to have the tongue completely free thus making the lower part of the machine accessible as well.
Technical Sheets PGMR
View the technical sheet of the PGMR 100.
View the technical sheet of the PGMR300.