Tel. 0331 201 683


The new series of G100CE presses is certified by TUV Italiae in compliance with the provisions of the Machinery Directive (98/37 / EC) and national implementing provisions:
UNI EN (292-1.292-2), UNI EN 349, UNI EN 418, UNI EN 692, UNI EN 954, UNI EN 1037, UNI EN

Technical data press G100CE


Absorbed power 4Kw
Maximum force 100kN
Supply 400V
Frequency 50 Hz.
Variable stroke mm 20,25,30,35,40
Strokes per minute (default) 200/140/93
Variable minute strokes (optional) inverter 84/220
Adjustment of bat 40mm
Flat-mace distance 280mm
Cavity depth 180/220mm
Passage between the shoulders 250/300mm
Flat dimension 320×480/400x550mm
Flat dimension 39mm
Hole on the table a richiesta
Club surface 100x120mm
Club hole a richiesta
Weight (standard presses) * 340kg
Height* 1250 mm
Width* 500 mm
Length* 660 mm
Noise level 71.25dB (A). measured at 0.5 meters distance from
itself and at 1.6 meters above the ground

* Excluding any base.


It is possible to download the use and maintenance manual in PDF format..

Case history: troubleshooting

In this section, We take part in our successes by telling you how we have analyzed in a more specific way the characteristics of some projects, finding new technological solutions to improve products and production processes and trying to make it clear what is good or not good of that determined project.

Case history: bearing assembly

Case history: applications

Case history: bearing assembly